Let‘know About The Sauce Filling Machine

  The sauce filling machine is the main equipment used to complete the filling operation. Install several filling heads in front of the host, and install suction cylinders on both sides, with each cylinder corresponding to a filling head. The liquid in the storage tank is pumped into the steel cylinder, pressed out, and poured into the corresponding bottle through the filling head. There is a micro cylinder on the filling head that drives the small piston to open and close the nozzle of the filling head, acting as a valve. At the beginning of filling, insert the nozzle into the bottle. The Chili sauce and paste filling machine/Chili sauce and paste packaging machine opens the small piston at a certain distance from the bottom of the bottle to start filling. During filling, the filling head will rise until the nozzle is closed, and then rise to the bottle mouth after filling. There are also two cylinder driven stop rods on both sides of the filling table (one at the bottle inlet and one at the bottle outlet), which can be used together with the bottle clamping device on the filling table to achieve filling.
  The conveyor belt motor of the sauce filling machine is controlled by a frequency converter, achieving stepless speed change and economic operation. After the motor is started, the feeding cylinder retracts, feeding empty bottles from the conveyor belt and starting to feed bottles; Then the outlet tube extends and the empty bottle sent is intercepted by the outlet stopper. A photoelectric switch is set at the bottle feeding place of the Chili sauce and paste filling machine/Chili sauce and paste packaging machine to detect the number of bottles entering. When the quantity is the same as the number of filling heads, the inlet cylinder extends, blocking the inlet from feeding the bottle, and the conveyor motor stops. After filling, the filling head rises, the discharge cylinder retracts, and the conveyor belt motor starts to rotate again. The filled bottle is sent out.