Introduction to the Structure of Vacuum Homogeneous Emulsifier

The vacuum homogenizing emulsification machine uses a concentric two axis structure, which can enable the agitator and shear of the vacuum emulsification machine to operate independently, and the product effect is very good. The innovative electrical control system and high-precision system software program ensure the stable and reliable performance of the vacuum emulsification machine. The materials are mixed and even by heating, dispersing, stirring and homogenizing emulsification, so that the particles of 200nm-2um can be quickly broken. The main boiler of the emulsifier is in a vacuum state, and the bubbles generated during the mixing process of the materials are timely removed, so as to ensure that the high-quality products with luster and delicacy can be manufactured.

Introduction to the structure of Wuxi Jiangke vacuum homogenizing emulsification machine with temperature regulating mechanism:

A. The heating and cooling device uses the temperature regulating piping set by the automatic unit valve unit to control the temperature regulation of the products by the steam, warm water, cooling water and tap water in the jacket of the mixing tank. In addition, special rotary joints are used at the inlet and outlet of heating and cooling, so that the mixing tank can be tilted forward and backward, and the piping burden will not be increased when starting. In addition, because the rubber tube is not used, its an integrity is guaranteed.

B. Although the inside and outside of the mixing tank are completely blocked by the thermometer, the temperature of the materials in the tank can be measured correctly by the thermometer installed in the pot. It is a standard practice to insert the thermometer into the thermal sensing part at the bottom of the mixing tank, but according to the different equipment specifications, it can also be inserted from the upper cover and or put into the central control paddle mixing shaft. Automatic temperature regulation (adjustable) can be realized through the linkage of thermometer and various control devices.