What Is Vacuum Emulsification

  In the emulsion homogenization pot, the materials pass through the Teflon scraper on the stirring frame in the pot (the scraper always caters to the inner wall of the pot and sweeps away the sticking materials on the wall), constantly generating new interfaces, and then pass through the frame stirrer and the opposite stirring blade to cut, compress and fold the materials, so that they can be stirred and mixed and flow down to the homogenizer below the pot, and then pass through the shearing, impact Turbulent flow and other processes make the material cut in the shear seam and quickly broken into 200nm ~ 2 μ M U.M. The granulation, emulsification, mixing, blending and dispersion of materials can be completed in a short time. Since the homogenizing pot is in a vacuum state, the bubbles generated during the mixing process of the materials are timely removed. After the homogenization of the laboratory emulsifier is completed, raise the pot lid and press the dump button switch to discharge the materials in the pot into the container outside the pot (or open the pot bottom valve and the pressurizing valve to directly discharge the materials).