Key Points Of Using Emulsifying Machine

  Wuxi Jiangke dispersion emulsifying machine manufacturer thinks that emulsifying machine is a very broad word, including many classifications and specifications, or use occasions. In different industrial mixing fields, the demand for emulsifying machine is very different. The emulsifying machine includes atmospheric high shear emulsifying machine, vacuum negative pressure homogenizing emulsifying machine, internal and external circulation emulsifying machine, lifting high shear emulsifying machine, etc. According to the different industrial occasions, the model and structure of emulsifier are also very different.

  The manufacturer of Wuxi Jiangke Disperse Emulsifier believes that the vacuum emulsion machine is used for homogeneous cutting and scraper mixing: after feeding (water can be used instead during commissioning), turn on the corresponding control switch to control the operation of the homogenizer and scraper mixing. The vacuum emulsification machine shall be kept clean. If the homogenizer is out of service or materials need to be replaced, the parts in contact with the working fluid of the homogenizer shall be cleaned as required, especially the cutting sleeve of the cutting wheel at its head, the sliding bearing and shaft sleeve in the homogenizer shaft sleeve. After cleaning and reassembly, the manual impeller shall be free of blockage. After the two flanges of the pot body and the pot cover are relatively fixed, the motor of the inching homogenizer should turn correctly, and can be started only when there is no other abnormality. During commissioning, the mixer shall be jogged for trial run, and the homogenizer shall be allowed to run after confirmation.