Introduction To Wuxi Jiangke Stainless Steel Electric Heating Emulsifying Tank

Introduction to Wuxi Jiangke stainless steel electric heating emulsifying tank:

1. Overview of stainless steel electric heating emulsifying tank at the bottom of shear emulsifying tank

The stainless steel batching and stirring tank (heated by electricity, steam and heat transfer oil) small-scale experimental reactor stainless steel enzymatic hydrolysis tank produced by our company is composed of pot cover, barrel, jacket, agitator, shaft seal transmission device and support. The pot body and parts in contact with the materials in the pot are made of 304 or 316 stainless steel. Due to different production processes and operating conditions, users can adopt jacket, half pipe, coil, Miller plate and other structures for heating and cooling. The jacket heating types are divided into electric heating rod heating, steam heating, and heat transfer oil circulating heating. The shaft sealing device is divided into packing seal and mechanical seal, and the mixing types are anchor type, slurry type, boiler wheel type, push type or frame type. The number, specification or other requirements of openings can be designed and made according to user requirements. Reaction kettle is widely used in building materials, chemical industry, pigment, resin, food and other industries. It has the characteristics of rapid heating, high temperature resistance, corrosion resistance, sanitation, no environmental pollution, no boiler automatic heating, convenient use and so on.

2. Shear emulsifying tank bottom shear emulsifying tank stainless steel electric heating emulsifying tank structural form

The equipment is composed of kettle body, kettle cover, jacket, agitator, transmission device, shaft seal device, support, etc. Mixing forms generally include anchor type, paddle type, turbine type, propulsion type or frame type. When the height diameter ratio of the mixing device is large, multi-layer mixing paddles can be used, and it can also be selected according to the requirements of users. A jacket is set outside the kettle wall, or a heat exchange surface is set inside the kettle, and heat exchange can also be carried out through external circulation. The heating methods include electric heating, hot water heating, heat transfer oil circulating heating, far-infrared heating, external (internal) coil heating, etc. the cooling methods are jacket cooling, coil cooling in the kettle, mixing paddle, etc. The supporting seat has supporting type or ear type bearing, etc. Gear reducer should be used when the speed exceeds 160 rpm. The number, specification or other requirements of holes can be designed and made according to user requirements.

The premise of use is that the customer has an external input source (such as steam) or a cooling source (such as tap water). It must be noted that the steam heating mode is upper inlet and lower outlet, and the liquid heating or cooling mode is lower inlet and upper outlet. There is no valve in the outlet pipeline of various ways to ensure smoothness. Electric heating reactor has the characteristics of rapid heating, high temperature resistance, corrosion resistance and no environmental pollution. It is widely used in daily chemical, chemical, pharmaceutical, food and other industries,.