Usage And Maintenance Of Vacuum Homogenizing Emulsifier

The vacuum homogenizing emulsifier is a material that is sheared, dispersed and impacted by the high-speed rotation of the homogenizing head connected to the engine. This will make the material more delicate and promote the integration of oil and water. It is widely used in cosmetics, body wash, sunscreen and many other cream products. Sauces and juices in the food industry. Vacuum homogenizing emulsifier is used for petrochemical products, paints and coatings.

Important safety precautions during use

1 every time the user starts the vacuum homogenizing emulsifier, the circulating water of the bearing water jacket shall be opened first, and dry operation is strictly prohibited.

2 when starting shift change, start the vacuum homogenizing emulsifier first and then start it again. If the starting load is too large to burn the motor, the inching test time shall not exceed 20 seconds.

3. During the operation, it is forbidden to cut off the water of the bearing water jacket and the outer sheath.

4. It is strictly forbidden to cut off the vacuum homogenizing emulsifying machine during the working process to avoid the temperature drop of emulsion and prevent accidents.

5 after production, the vacuum homogenizing emulsifying machine must be washed with water. It is strictly prohibited to start the vacuum homogenizing emulsifying machine from the load.

6 before disassembly or maintenance, the vacuum homogenizing emulsifier must be cleaned.

7. In order to ensure production safety and avoid human error, the equipment must be equipped with automatic alarm and automatic shutdown of process parameters such as over temperature, over voltage, cut-off, water content and abnormal current fluctuation. In continuous emulsification operation and control.

Lubrication, maintenance and repair:

1. The vacuum homogenizing emulsifier has undergone strict dynamic balance inspection, water jacket pressure test and whole machine operation test in the factory. However, after long-distance transportation, the user should check the following contents before the first use:

(1) Check whether the bolts at each part are loose. And inject grease into the bearing.

(2) Rotate the coupling by hand to see if there is a card touch, and ensure that it can be installed, commissioned and used.

2 the bearing of the vacuum homogenizing emulsifier shall be lubricated frequently, and the lubricating grease shall be added once every half month. Lithium based grease or molybdenum disulfide grease is recommended.

3. The user shall conduct comprehensive maintenance every half year during continuous operation of the equipment, and check whether the bearing, stator, rotor and connecting parts are in good condition.

4. The equipment must be stopped in case of any bad phenomenon during operation. It can be opened after diagnosis and repair. It is forbidden to carry sick work.