MT Disinfectants Homogenizer Mixer/liquid soap mixer
Disinfectants homogenizer mixer is suitable for producing the hot sale disfinfectants. Affected by COVID-19,the request of disinfectants increased. Disinfectant products are in short all over the world. So that is a chance to produce disinfectant products.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Disinfectants Homogenizer Mixer
Disinfectants homogenizer mixer is suitable for producing the hot sale disfinfectants. Affected by COVID-19,the request of disinfectants increased. Disinfectant products are in short all over the world. So that is a chance to produce disinfectant products.
The disinfectants production line are include by Reverse osmosis water treatment, pure water storage tank, disinfectant mixing system, filling machine。
Machine 1:Reverse osmosis water treatment
I.Design Basis
1.Raw water quality:
Water source should meet the requirement of GB5749 standard, besides the T.D.S≤400µs/cm
2.Power supply: 380V 50Hz
II.Check Standards
1. sand filter SDI ≤4
2. sand filter residual chlorine ≤0.1PP
3.One stage RO desalination rate≥97—98%
Two stage RO desalination rate≥99.5%
4.T.D.S≤3µs/cm
5.System continuously work for 24 hours without failure.
Machine 2: Disinfectant Mixing Tank
I.Description:
Disinfectant stainless steel mixing tank is used in the mixing, homogenizing. This mixer are design with jacket, it can be used to achieve heating preservation, cooling, heating etc. It is special design for disinfectant produce.
II.Technical Details
Kettle Cover | Liquid(particle)inlet, air filter(respirator), loading port, inspect light and sight glass, 2 PCS CIP drencher head | |
Mixing pot |
Material | Inner layer: SUS304 thickness: 4mm |
Middle layer: SUS304 thickness: 3mm | ||
Outside layer: SUS304 thickness:3mm | ||
configuration | Bottom material exhaust, size: DN25 | |
Temp. sensor (0-199℃) | ||
Stirring system |
Stirring paddle | Material: SUS304 |
Power：1.1kw/380V/50Hz；RPM：65r/min | ||
Homogenizer | 2.2kw,380V/50Hz/;RPM:0~2800（Frequency control） | |
Heating method | Jacketed; work with heating&cooling system Heating power:3kw | |
Exhaust method | Bottom valve | |
Machine 3:Semi-automatic Pneumatic filling machine
Semi-automatic pneumatic filling machine is suitable for filling water, cream, lotion etc. According to the filling requirement, the worktable is adjustable to go up and down.
The filling feeding: by hopper or transfer pump
Control method: pneumatic
Specification:
1. Compressed Air pressure: 0.4~0.6Mpa
Volume>0.3m3/min
2. Filling Capacity: A: 5-15, B:10-75, C:20-150, D: 50-300, E: 100-500, F: 200-1000g
3. Mechanical Capacity: 10~40 bottles/min.
4. Filling Error: <2%
5. Moveable Range of Filling Base: 100mm
6. Overall Diameter of Filling Container: Depending on material and filling quantity.
Hot Tags: MT Disinfectants Homogenizer Mixer/liquid soap mixer, China, manufacturers, suppliers, factory, low price, made in China
