Home / Products / Powder Liquid Mixer / Content

Products

Solid-liquid Mixing Equipment

The solid-liquid pump is mainly applicable to the homogeneous mixing of powder materials with light specific gravity of solids or more dust with liquids. The solid-liquid mixing homogenization pump moves at high speed in the narrow aisle through the suction device of the main shaft, and the vacuum generated will suck the solid materials with slightly light specific gravity into the working chamber of the homogenizer through the hose for mixing and homogenization transportation. It is generally connected to the outlet of the tank in the reactor area. When the liquid flows through the homogenizer, it is mixed and sheared with the inhaled solid materials at high speed, so that the solid materials can be mixed, reacted, depolymerized, dissolved and homogenized in time, avoiding the problems of raw material loss and environmental pollution caused by the flying dust generated by solid-liquid mixing in the traditional process, Moreover, the powder is mixed and wetted by the liquid in the working chamber of the homogenizer, homogenized and sent out of the pump body in the form of emulsion liquid. At this time, the structural viscosity or thixotropic property will not have negative effects. Therefore, in the process of homogenization, the strong shear force makes the powder disperse in time in the liquid, and changes with the shear force, and the viscosity of the emulsion is also reduced to a low point here.

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

The solid-liquid pump is mainly applicable to the homogeneous mixing of powder materials with light specific gravity of solids or more dust with liquids.

The solid-liquid mixing homogenization pump moves at high speed in the narrow aisle through the suction device of the main shaft, and the vacuum generated will suck the solid materials with slightly light specific gravity into the working chamber of the homogenizer through the hose for mixing and homogenization transportation. It is generally connected to the outlet of the tank in the reactor area. When the liquid flows through the homogenizer, it is mixed and sheared with the inhaled solid materials at high speed, so that the solid materials can be mixed, reacted, depolymerized, dissolved and homogenized in time, avoiding the problems of raw material loss and environmental pollution caused by the flying dust generated by solid-liquid mixing in the traditional process, Moreover, the powder is mixed and wetted by the liquid in the working chamber of the homogenizer, homogenized and sent out of the pump body in the form of emulsion liquid. At this time, the structural viscosity or thixotropic property will not have negative effects. Therefore, in the process of homogenization, the strong shear force makes the powder disperse in time in the liquid, and changes with the shear force, and the viscosity of the emulsion is also reduced to a low point here.