Home / Products / Powder Liquid Mixer / Content

Products

Power Liduid Chemical And Chocolate Mixer

Liquid Powder Mixer is composed of a casing and a mixing pump gear, which consists of rotor and stator, are mounted vertically. the suction side has a double- wall tube that keeps the inlet of solids separate from the liquids, Thus avoiding the formation of clots before the material enters the casing. The liquid enters the mixing chamber at a high velocity, Thereby creating a vacuum in the center of the mixing pump gear, which causes the suction of solids. The fall of the solids could be regulated by means of a valve situated at the bottom of the hopper

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

The liquid enters the mixing chamber at a high velocity, Thereby creating a vacuum in the center of the mixing pump gear, which causes the suction of solids. The fall of the solids could be regulated by means of a valve situated at the bottom of the hopper.

Note:

1.The output data of the liquid is the medium of water, the solid phase is measured by white sugar as the medium, the viscosity of the liquid and the bulk density of the solid water content will have a great impact on the output.

2.The equipment can be customized according to customer's material, in order to meet the needs of the process. Like high viscosity , strengthen the function of homogeneous, heat sensitive materials etc.

3.Interface way can choose (hoop, thread, and flange).

4.Material of the pump body can choose SS 304, SS 316, SS316L， 2Cr13，9Cr18 etc.

5.Sealing material: Standard rubber ring is silicone rubber, according to the media requests; you can choose fluorine rubber, EPDM, PTFE

6. Frequency speed regulation, non frequency speed regulation, explosion proof design, non explosion proof design.

Model	Liquid Flux	Powder capacity	Powder	Powder Input /Liquid Input/output Size
Model	L/H	Kg/H	Kw	DN
PLM-2	500	100	2	38/25/25
PLM-4	700	180	4	38/50/40
PLM-5	1500	350	7.5	38/50/50
PLM-11	4500	1000	11	50/50/50
PLM-15	6000	1500	15	50/50/50
PLM-18	7000	2000	18.5	80/65/65
PLM-22	8000	2500	22	80/65/65
PLM-37	10000	4000	37	100/80/80
Note： 1.The output data of the liquid is the medium of water, the solid phase is measured by white sugar as the medium, the viscosity of the liquid and the bulk density of the solid water content will have a great impact on the output. 2.The equipment can be customized according to customer's material, in order to meet the needs of the process. Like high viscosity , strengthen the function of homogeneous, heat sensitive materials etc. 3.Interface way can choose (hoop, thread, and flange). 4.Material of the pump body can choose SS 304, SS 316, SS316L， 2Cr13，9Cr18 etc. 5.Sealing material: Standard rubber ring is silicone rubber, according to the media requests; you can choose fluorine rubber, EPDM, PTFE 6. Frequency speed regulation, non frequency speed regulation, explosion proof design, non explosion proof design.