Mixing Tank Use And Maintenance

1. This equipment is a normal pressure equipment. If the heat exchanger is unblocked, it is also considered as normal pressure. If the pressure is too high, please check whether the inlet and outlet are blocked.

2. The gear unit should be equipped with 40#--50# engine oil or 70#--90# extreme pressure industrial gear oil. After the first operation for 20 days (8 hours per day), replace the oil and clean the oil in the fuel tank. Replace every 3 to 5 months and clean the fuel tank. (Except for no gear reducer)

3. If a condenser is installed, it can be judged according to the effect of heat exchange whether it should be cleaned.

4. The loading capacity of the stirred tank should be strictly in accordance with the effective volume of the stirred tank. It is strictly forbidden to use the overload to avoid burning the motor or damaging the reducer and other components.

5. If the equipment is not used for a long time, it should be completely cleaned, and the lubricating oil should be injected everywhere and the power supply should be cut off.