Home / Products / Mixing Tank and Storage Tank / Content

Products

Stainless Steel Heating And Insulation Mixing Tank

Mixing Storage Stainless Steel Tank with agitator is also called mixing tank, mixing tank, mixing tank, etc. It is mainly used for liquid-liquid mixing, so as to achieve full mixing, reaction, suspension, heat transfer and other purposes. The structure and configuration of stainless steel mixing tank can be standardized and humanized according to the requirements of production process. During the mixing process, it can realize feeding control, discharging control, mixing control and other manual automatic control.

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

The features of stainless steel heating and insulation mixing tank

Product name: stainless steel heating and insulation mixing tank1. Instructions: Before the stirring barrel is used, the liquid reservoir must be cleaned with light hot water, and then sterilized with steam. The material filling liquid shall enter the cylinder by the material pipe on the fixed cylinder head, or the output material shall be poured into the cylinder with the cylinder head too full to avoid splashing when the material is stirred, resulting in unsanitary environment or loss. 2, heating method: if the equipment has a temperature device, first adjust the thermometer to the required temperature, and then the power supply, the use of power should be cut first, and then turn off the agitator power supply. 3, cleaning: after processing, drain the remaining materials in the tank, wash with warm water as soon as possible, brush off the sticky materials, and then use 10~50 degrees Celsius alkali water in the inner wall of the container comprehensive cleaning, and rinse with water, until the next time, with hot water or steam, maintain 3-4 minutes of disinfection. 4, maintenance: always pay attention to the work of the whole equipment and the reducer, the reducer lubricating oil should be immediately added half a year oil change (40# oil) and pay attention to the liquid level of thermal oil, such as insufficient thermal oil to immediately stop heating, otherwise, it will burn the electric heating rod, when the equipment is not used, be sure to clean the interlayer with warm water to avoid salt water corrosion, often scrub the cylinder, Keep the appearance clean, the inner liner bright, to achieve the purpose of durability. 5, after the use, the power supply should be cut off first, and then add cooling water to protect the electric heat pipe or electric heating rod part to extend the service life.

stainless steel mixing tank