Flow pulsation of high shear emulsification machine

Flow pulsation of high shear emulsification machine
Today, the editor will briefly introduce the flow pulsation of the high shear emulsification machine. Interested friends, let's take a look together, hoping it will be helpful to you!
The characteristics of the emulsification machine drive determine that the variation in the gap between the teeth in the emulsification groove caused by the emulsification tooth shape is uneven during the emulsification machine drive. During the emulsification transmission process of a pair of gears, there is a small change in the gap between the teeth at the beginning and end of the emulsification process. Therefore, at this time, the high shear emulsification machine outputs less oil flow to the outside; When a pair of emulsions are emulsified at the node position, the tooth clearance changes greatly, therefore, at this time, the oil flow output from the high shear emulsifying machine is large.
The flow pulsation of the high shear emulsification machine is quite severe, and the fewer teeth of the gear pair, the more severe the flow pulsation. The pulsation of flow rate will cause the pulsation of oil pressure, causing vibration and noise in the system operation. Therefore, high-precision machinery should not use this hydraulic pump.
The above content is for your reference only. Thank you for reading. If you have any further questions, please contact us. Feel free to call us at any time. We will have dedicated staff to answer your questions until you are satisfied.