Liquid Product High Pressure Homogenizer For Milk And Juice

Liquid product high pressure homogenizer for milk and juice,it is efficient, rapid and uniform a phase or more of the phase distribution to another continuous phase, and in the usual case each phases are mutually insoluble. Due to the rotor is generated by high speed rotation high tangent speed and high frequency mechanical effect bring strong kinetic energy, so that immiscibility of solid phase,liquid phase and gas phase in the corresponding mature technology and right amount under the common function of additives, the instant uniform fine disperse emulsion, after high frequency move in circles, ultimately get the steady and high quality products.

I. Design Basis

   A. Usage: cosmetic, pharmaceutical, chemical industries, food and drinking water

   B. Capacity: One stage 250L/H

   C. Raw water quality:

       1. Water source should meet the requirement of GB5749 standard, besides the T.D.S≤400µs/cm

       2. Raw water supply≥250L/H

   D. Power supply: 380V 50Hz

II. Technical process

A. Detail instruction:

Raw water flow into the vessel, raw water pump pumped raw water into sand filter which contains quartz sands which are used to remove the suspensions, colloids, rust, impurities in water as well as some microbes (such as red worm) →carbon filter which contains high quality first class fruit shell active carbons which are used to remove the organics in water as well as oxygen, bad odor, pesticide and colloids which are not removed thoroughly by sand filter→water softener, which is used to reduce the water hardness by exchange magnesian ion and calcium ion in water through cation resin so as to remove the state of calcium and magnesium ions→security filter which installed three pieces of PP filter (length 20 inch 5µm) which are used to remove the impurities(diameter above 5µm). The above treatment of procedures is called pretreatment which ensure RO system work well and prolong the lifespan. After the process of pretreatment, the water flow into one stage RO system through one stage high pressure pump, the concentrated waste water discharged, first time purified water flow into the storage vessel, two stage high pressure pump pumped the water which in the storage vessel into the two stage RO system for second time purifying, after this, water desalination rate reach 99.9% TDS reach 3µm/cm. The well water pass by the UV light which destroy non-isolated microbes so as to enable the microbes standards of well water meet the requirement.. Besides, for the sake of safety, installed 0.22µs mirco-filter to ensure the effective control when the well water is polluted.

III. Check standards

A. sand filter  SDI ≤4

B. sand filter  residual chlorine ≤0.1PP

C. One stage RO desalination rate≥97—98%

      Two stage RO desalination rate≥99.5%

D. Capacity≥2000L /H which means this machine can produce well water 250L/H.

E. T.D.S≤3µs/cm

    F. System continuously work for 24 hours without failure.

Hot Tags: liquid product high pressure homogenizer for milk and juice, China, manufacturers, suppliers, factory, low price, made in China